ToolBox

Wires: Diameter and cross sectional area – Limits


Diameter [mm] – AWG

The values for diameter need to be between 0.0124 mm and 14.733 mm! This equals AWG values from -5 (000000 (6/0)) to 56.


Diameter [mm] – SWG

Values for the diameter need to be between 0 and 12.7 mm! This equals Standard Wire Gauges from 50 to 7/0 (here "-7").


Cross sectional area [mm²] – AWG

Values for the cross sectional area need to be between 0.000120762 square-mm and 170.48 square-mm! This equals AWG values from 56 to -5 (000000 (6/0)).


Cross sectional area [mm²] – SWG

Values for the cross sectional area need to be between 0 and 126.6769 square-mm! This equals Standard Wire Gauges from 50 to 7/0 (here "-7").


AWG – Diameter and cross sectional area [mm]

Values for AWG range from -5 (000000 (6/0)) to 56. Only integers will be accepted. All decimals will be truncated automatically! Thus, 3.3 or 3.9 will become 3.


AWG – SWG

To find equivalent SWG values, the input for AWG is limited to values ranging from -3 (0000 (4/0)) to 50 (integers only; decimals will be truncated automatically!).


AWG – Diameter and cross sectional area [inch]

Here, valid values for AWG range from -5 (000000 (6/0)) to 56 (integers only; decimals will be truncated automatically!).



SWG – Diameter and cross sectional area [mm]

SWG – AWG

SWG – Diameter and cross sectional area [inch]

The input for SWG is limited to values ranging from -7 (7/0) to 50 (integers only; decimals will be truncated automatically!).


Diameter [inch] – AWG

Values for the diameter need to be between 0.46 inches and 0.00045 inches! This equals AWG values from -3 (0000 (4/0)) to 56.


Diameter [inch] – SWG

The values for the diameter need to be between 0 and 0.5 inches! This equals Standard Wire Gauges from 50 to 7/0 (here "-7").


Cross sectional area [inch] – AWG

Here, the allowed values for the cross-sectional area range from 0.000000188 square-inches to 0.2642445285 square-inches! This equals AWG values from 56 to -5 (000000 (6/0)).


Cross sectional area [inch] – SWG

The values for the cross-sectional area need to be between 0 and 0.196349588 square-inch! This equals Standard Wire Gauges from 50 to 7/0 (here "-7").